The LT is Pro's entry-level offering in the road stem market and while it may not be the lightest or cheapest out there, there is no reason I can find to dismiss it. Its subtle looks will match any bike, it's easy to set up and it weighs just over 10g more than its big brother, the PRO Vibe, which costs a cool £99.99.
Stems are probably the most difficult part of a bike setup to test; after all, they are pretty much all the same when it comes to design, especially the aluminium alloy ones: a tube with a couple of clamps attached either end.
But I have tested so many bikes over the years, and switched components on others way more times than anyone should in a lifetime, that I know there are tiny little differences to how they feel that you do pick up on.
And my conclusion of the PRO LT is that... it feels pretty much like any other alloy stem of this price point, the kind of stuff you find fitted to most bikes up until the £1,500 price point.
It's plenty stiff enough and you do get that rigid buzzy feel that alloy is renowned for, especially cheaper stems. I was using the LT with a carbon fibre Cinelli Neos bar and the difference in ride quality over the Bontrager carbon stem I'd replaced was noticeable. It's not uncomfortable, just that you notice that road noise a little bit more.
You can get cheaper stems that'll do the same job in terms of clamping your bars tight and offer plenty of stiffness, so it really comes down to details.
A lot of stems at this price have plated steel bolts which look nice and shiny when everything is new, but after a bit of use they can soon start showing signs of rust. The LT uses anodised alloy bolts in black, which should stay looking clean, although they are softer so you need to take care so as to not round them off.
The steerer clamp is designed, as you'd expect, for a 1 1/8in tube, and something I do like is that the clamp is solid in design rather than having a cutout that shows the fork steerer. It may be a tiny bit heavier like this, but to my mind it is much better aesthetically than having an unpainted alloy steerer showing through, at odds with your bike's paintjob.
The front uses a single clamp piece for holding the handlebar in place, which is easy to fit and tighten without needing three hands. There is also a handy painted centre marker to align your bar with.
We've got the +/- 6° version here in a 100mm length; the range covers 60mm to 120mm in 10mm increments.
According to PRO's website it also makes a +/- 17° option for those who want the professional slammed look, or a +/- 35° for track riders or those who want a more upright position if you flip it. It doesn't look like you'd be able to get either of these in the UK, though, at least not without a special order.
Looking at value, when you take into account everything that the LT has going on I'd say it's fairly priced. The cheapest price I could see was £29.99.
The ITM Ergal 7075 is quite a bit lighter at 117g compared to the LT's 153g, and although it was just £27.99 when it was reviewed, the 'best deals' table at the bottom of the review shows prices have edged up to the £35 mark.
Going the other way, there is the 3T Arx II Pro with an RRP of £52.99, though you can find it online for around £35 too.
In conclusion, the PRO LT is a well-made, nicely finished stem that does the job at a decent price.
A sensibly priced stem offering good looks and rust-free fixings
If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website
road.cc test report
Make and model: PRO LT Stem
Size tested: 100mm, 6 degree
Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
PRO says: "The LT Stem is made from 3D forged 6061 aluminium, which provides high strength and excellent resistance to corrosion. This versatile Ahead stem features a reversible + or - 6° rise and is compatible with 1-1/8" steerer tubes. Installation couldn't be easier thanks to the four-bolt removable faceplate."
The LT is PRO's entry level stem and it does a good job being easy to fit, competitive on price and weight.
Tell us some more about the technical aspects of the product?
Material: Anodised 6061 aluminium alloy, 3D forged
Angle: +/- 6 degrees, +/- 17 degrees, +/- 35 degrees
Length: 60-120mm, 60-120mm, 70 & 90mm
Steerer: 1 1/8"
Tell us how the product performed overall when used for its designed purpose
It held the handlebar tight and didn't flex.
Tell us what you particularly liked about the product
The single piece front plate is easy to fit.
Tell us what you particularly disliked about the product
There are cheaper out there that'll do the same job.
Did you enjoy using the product? Yes
Would you consider buying the product? Possibly
Would you recommend the product to a friend? Yes
Use this box to explain your score
The PRO LT is a decent no-frills stem, if a little on the heavy side. With the inclusion of things like black anodised bolts it'll stay looking good even when it's seen plenty of British weather.
About the tester
I usually ride: This month's test bike My best bike is: Kinesis Aithein
I've been riding for: 10-20 years I ride: Every day I would class myself as: Expert
I regularly do the following types of riding: time trialling, commuting, club rides, sportives, fixed/singlespeed
Stu knocked out his first road.cc review back in 2009 and since then he's chucked the best part of seventy test bikes around the West Country, a couple of them quite literally! With three alloy and two steel bikes in his fleet he's definitely a metal man (that'll be the engineering background) but is slowly warming to that modern carbon fibre stuff along with fat tyres & disc brakes.
It's not all nostalgia though, after spending the last few years in product design Stu keeps banging on about how 3D printing is going to be the next big thing and he's a sucker for a beautiful paint job too.